Supports retropie, driver free. Supports all versions of Raspberry Pi. Supports ubuntu, single point touch, driver free. Supports raspbian, 5-points touch, driver free. The display orientation is portrait by default, 400×1280 resolution H×V.
Waveshare - Supports pi 4b/3b+/3a+, cm3+/4*, cm3+/4 requires extra adapter board. Adjustable Brightness Via Software. Display port:dsi, Touch Port:I2C. Up to 5-points touch, depending on the operating system. Supports raspbian, 5-points touch, driver required.
Waveshare - While b for IPS ver. Drivers provided works with your own Raspbian/Ubuntu/Kali;Supports FBCP software driver as well, allows to config software resolution and set up dual-display.
Size perfectly fits the pi raspberry Pi B+/2B/3B/3B+;High quality immersion gold surface plating. With better displaying. 3. 5inch rpi lcd a and 3. 5inch rpi lcd b are hardware compatible with each other uses different driver, and can be mutually substituted in most cases.
Combined with the raspberry pi, allows you to:Take photos by touching up to 17 camera modes;Use software keyboard system interaction without keyboard/mouse. 480x320 hardware resolution; Resistive touch control; Supports any revision of Raspberry Pi directly-pluggable. A for low cost ver.
Waveshare - Note:version 2 please use corresponding demo code in wiki. This is an e-ink display hat for raspberry Pi, communicating via SPI interface. Please set the e-paper to sleep mode or power off it directly, otherwise, the e-Paper is damaged because of working in high voltage for long time.
No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing.
Spi interface, etc. Onboard voltage translator, compatible with 3. 3v/5v mcus. Comes with development resources and manual examples for Raspberry Pi/Jetson Nano/Arduino/STM32. Standard raspberry pi 40pin gpio extension header, for connecting with other controller boards like Raspberry/Arduino/Nucleo, supports Raspberry Pi series boards, Jetson Nano.
Due to the advantages like ultra low power consumption, industrial instrument, clear display without electricity, with embedded controller, wide viewing angle, 7.5inch, 800×480 resolution, it is an ideal choice for applications such as shelf label, and so on.
Waveshare - Backlight can be turned off to lower power consumption. Compatible and direct-connect with any revision of raspberry Pi except the Pi 1 model B or Pi Zero, which requires an HDMI cable; Drivers provided works with your own Raspbian/Ubuntu/Kali/Retropie.
Note: no touch when working as a computer monitor for windows, in this case, touch panel is unavailable and HDMI cable is required.
1024x600 hardware resolution; Resistive touch control;IPS technology. Perfect displaying effect, very wide viewing angle. Hdmi interface for displaying, no I/Os required however, the touch panel still needs I/Os.
Waveshare - Adjustable brightness via software. Supports pi 4b/3b+/3a+/3b/2b/b+/a+, another adapter board is required for CM3/3+, supports raspbian/ubuntu/kali and WIN 10 IoT, driver-free.
5 inch tft screen capacitive touch control, support up to 5-points touch. 5 inch capacitive touch display for Raspberry Pi, TFT wide angle, 800×480 resolution, toughened glass touch panel. Mipi dsi interface, refresh rate up to 60Hz.
Waveshare - Combined with the raspberry pi, allows you to: Take photos by touching up to 17 camera modes;Use software keyboard system interaction without keyboard/mouse.
Drivers provided works with your own Raspbian/Ubuntu/Kali;Supports FBCP software driver as well, allows to config software resolution and set up dual-display.
Ips technology, high quality and perfect displaying from very wide viewing angle; Size perfectly fits the Pi Raspberry Pi B+/2B/3B/3B+;High quality immersion gold surface plating. Supports any revision of Raspberry Pi directly-pluggable. 480x320 hardware resolution; Resistive touch control;.
Waveshare - Spi interface, etc. Ultra low power consumption, basically power is only required for refreshing. Onboard voltage translator, for connecting with other controller boards like Arduino/Nucleo, compatible with 3. 3v/5v mcus.
Compatible with raspberry pi zero/Zero W/Zero WH/2B/3B/3B+, Jetson Nano. Comes with development resources and manual examples for Raspberry/Jetson Nano/Arduino/STM32. Note:version 2 please use corresponding demo code in wiki. No backlight, keeps displaying last content for a long time even when power down.
